Overview
A real-time space battle for up to 18 captains
DECWAR is a real time space battle game designed to be played by from 1 to 18 people. The object of the game is to destroy all enemy bases and ships, and capture all enemy planets, before the enemy does the same to you. Each person plays on a separate terminal, and enters the game by typing
1981 · PDP-10R GAM:DECWAR
Players are free to enter and leave the game as desired, since each has his own job and therefore won't interfere with the other players (the jobs interact through a shareable high segment).
Starting a game
The first person to run the game selects the startup options. The startup options are:
- Regular or Tournament game A regular game randomly initializes the galaxy. A tournament game prompts for a startup code. Each tournament game played with the same code has the same initial galaxy setup. Answering with a <CR> defaults to a Regular (ie random) game setup.
- Include Romulans Romulans are nasty beasts that beginners are better off without. However, if you're the only person playing, the Romulan is your only competition. Romulans tend to make for shorter games, and answering with a <CR> defaults to include Romulans in the game.
- Include black holes Black holes are annoying, since if you are displaced into one, you're dead. They also tend to gobble up stray torpedos. Answering with a <CR> defaults to NOT include any black holes.
Sides and ships
There are two primary opposing forces in the galaxy -- Humans (Federation) and Klingons (Empire). As you enter the game for the first time, you get to choose which side you'll join (unless there is a large imbalance in the team sizes). If you are subsequently destroyed and later reenter the game, you automatically rejoin your old team.
You get to select the ship you want to control from a list of remaining ships on your side. There are 9 ships on each side:
Federation ships
- Excalibur
- Farragut
- Intrepid
- Lexington
- Nimitz
- Savannah
- Trenton
- Vulcan
- Yorktown
Empire ships
- Buzzard
- Cobra
- Demon
- Goblin
- Hawk
- Jackal
- Manta
- Panther
- Wolf
The bold letter is the one-character abbreviation for each ship (for example PH C B phasers the Buzzard).
Your ship’s devices
Due to continuous espionage activities, present front-line ships of the Federation and the Klingon Empire are identical in strength and weaponry. These ships can move from sector to sector using either warp or impulse engines, can attack enemy installations and ships using either photon torpedoes or phasers, and can defend themselves against such attack using their deflector shields. All ships also possess sub-space radios which keep them in touch with friendly starbases and other ships.
The various devices of a ship are subject to damage. This damage may be due to enemy attack or to over use. These damages, unlike total ship damage (see ship attributes below), may be repaired while underway. If damage on a device is less than 300 units, its performance is degraded. If damage is 300 or more units, the device is inoperative. A ship possesses the following devices:
- Warp Engines These engines are the normal mode of travel for starships. The maximum speed is warp factor 6, with warps 5 and 6 risking potential damage to the engines. If warp engines are damaged (less than 300 units) the maximum speed is warp factor 3.
- Impulse Engines These engines are basically for emergency use while the warp engines are critically damaged. Impulse engines move the ship at warp factor 1.
- Photon Torpedo Tubes Used to fire photon torpedoes. If these tubes are damaged, the accuracy of torpedo bursts is impaired. The maximum torpedo range is 10 sectors.
- Phaser Banks Each ship possesses two phaser banks, with a single phaser control. Damage to this phaser control or to the ship's computer reduces the strength of the phaser hit.
- Deflector Shields The deflector shields of a ship protect it from damage from phaser and photon torpedo hits, and shield it from the energy released when a star goes nova. The percent shield strength indicates the percent of the incoming hit which will be nullified. In addition, strong deflector shields may deflect photon torpedoes with little or no damage. NOTE: If a ship's shields are up, the amount of energy expended during movement is doubled.
- Computer The ship's computer is used for computed firing, computation during ship movement, and for phaser control. If the computer is inoperative, navigation during warp and impulse movement becomes inexact.
- Life Support If the life support units of a starship are inoperative, the ship must either repair this damage or dock within 5 stardates. If this is not accomplished, the crew will die.
- Sub-Space Radio The sub-space radio is used to communicate with other ships, of either side. Bases under attack also use the sub-space radio to call for help and notify their team's ships of their destruction.
- Tractor Beam The ship's tractor beam is used primarily to tow damaged friendly ships away from danger. The beam can not be used unless both ships have lowered their shields.
Energy, shields and damage
In addition to the individual devices discussed above, a newly commissioned ship (or a fully repaired and rearmed older ship) possesses the following attributes:
- 5000 units of ship energy Ship energy is used during movement and phaser firing. It is also decreased each time the ship gets hit with phasers or photon torpedoes. If this quantity ever reaches zero, the ship is dead. A ship possessing 1000 units of ship energy or less automatically goes to yellow alert, and a warning bell sounds after every move.
- 2500 units of shield energy This energy is stored in the ship's shields (whether up or down), and is separate from the ship energy. However, energy may be transferred between these two energy reserves as needed. If shields are up, their energy is decreased each time the ship gets hit.
- Zero units of ship damage During battle, a ship collects hits from enemy installations and ships. If these accumulated hits ever reach 2500 units of damage or greater, the ship is destroyed. Ship damage may be reduced only by docking.
The galaxy and its enemies
The galaxy is arranged in a grid of 75 by 75 sectors. Players can move freely throughout the galaxy in search of enemies, which come in several categories:
- Romulan This can be the most dangerous thing to come up against, and fortunately there is a maximum of 1 Romulan in the game at any given time. The Romulan moves around concealed by his cloaking device until he comes across a suitable target (Federation or Empire ship or base) which he immediately proceeds to attack. An infinite supply of torpedoes and energy make him a formidable foe. If you kill one, another will eventually appear somewhere in the galaxy.
- Enemy ship This is the second most dangerous thing to come across, since all enemy ships are backed by human intelligence. All ships are created equal, and so the outcome of a clash between two ships is usually due to skill on its captain's part, although some other factors do come into play.
- Enemy base These aren't dangerous unless you come within range (4 sectors) since they are immobile. If you ARE foolish enough to get within range, however, their overwhelming phaser power will quickly pound you into rubble! Destroying a base is useful primarily because this removes it from use by your enemy (bases are used as supply stations and as a refuge in times of stress). A damaged starbase will slowly build itself back to full strength if it is not completely destroyed.
- Enemy planet These are just like enemy bases, except that they are weaker (how much weaker depends on how many fortifications the enemy has built on them), and they can be captured. Their firing range is only two sectors, and they can re-supply the enemy less rapidly than can a base.
- Neutral planet While these aren't strictly classified as enemies, they will take pot shots at you (their range is also 2 sectors), so be wary of them. You can capture neutral planets and win them over to your side.
Command reference
Every command, A to Z
In each syntax line, the HIGHLIGHTED letters are the shortest abbreviation you can type. Square brackets mark optional parameters, angle brackets mark values you fill in, and a vertical bar separates choices.
List various BASE information
List location and shield percent of friendly bases; location of known enemy bases; or count of bases of either side within a specified range or the entire galaxy. The default range is the entire galaxy, and the default side is friendly bases only. See the help for LIST for more information and the complete set of keywords that can be used to modify BASES output.
Examples
BA | List location and shield percent of all friendly bases. |
BA ENEMY | List location of all known enemy bases. |
BA SUM | Give summary of all friendly bases. |
BA ALL SUM | Give summary of all bases. |
BA CL | List the location and shield percent of the closest friendly base. |
BA 34 26 | List the location and shield percent of friendly base at 34-26 (it doesn't have to be friendly, but you can't see the shield percent of an out of range enemy base). |
BUILD fortifications on a captured planet
SyntaxBUild [Absolute|Relative] <vpos> <hpos>
A fortified planet hits harder and is more resistant to destruction by the enemy. A planet can normally be built up to 4 times. As your team's starbases are destroyed by enemy action, a fifth build will complete the construction of a new starbase on the planet. Only 10 starbases can be functional at any one time.
Examples
BU 32 12 | Build the planet at sector 32-12. |
BU A 32 12 | Equivalent to "BU 32 12" |
BU R 1 1 | Build the planet at sector 32-12, if your present location is 31-11. |
CAPTURE a neutral or enemy planet
SyntaxCApture [Absolute|Relative] <vpos> <hpos>
At the start of the game, all planets are neutral (they fire at everyone!). Once captured by either side, they fire only at enemy ships, and can be DOCKed at to refuel and rearm, just like a base (except a planet can only supply half the resources that a base can). Enemy planets can also be captured. When capturing an enemy planet, 1 second is added to the normal pause time of 5 seconds for each BUILD present. Also, 50 units of ship energy are lost for each build.
Examples
CA 12 32 | Capture planet at 12-32. |
CA A 12 32 | Equivalent to "CA 12 32". |
CA R 1 1 | Capture planet at sector 12-32, if your present location is 11-31. |
DAMAGE report
SyntaxDAmages [<device names>]
List damaged ship devices and the amount of damage to each. The condition of all or just selected devices may be examined. Total ship damage is not reported.
Examples
DA | List all damaged devices and their current damages. |
DA SH T | List damages for SHields and Torpedo tubes. |
DA PH RA C | List damages for PHasers, sub-space RAdio, and Computer. |
DOCK at a friendly base or planet
SyntaxDOck [Status [<device names>]]
Refuel, repair, and rearm your ship, and set your ship's condition to green. While docked, any repairs are accelerated, and you have an "infinite" supply of torps. If you have no damages and are completely refueled and rearmed, DOCKing will have no effect on your ship. A STATUS command string can be appended to a DOCK order. The following table lists the maximum resources available per move when DOCKing at a base or planet:
| Resource | Base | Planet |
|---|
| Ship energy | +1000 | +500 |
| Shield energy | +500 | +250 |
| Photon Torpedoes | +10 | +5 |
| Life Support Reserves | +5 | +5 |
| Ship Damage | -100 | -50 |
| Ship Damage, if already docked | -200 | -100 |
Examples
DO | Dock, no status report. |
DO ST | Dock, show ship's status AFTER docking. |
DO ST SH T | Dock, show ship's shield strength and number of torpedos on board AFTER docking. |
Transfer ENERGY to a friendly ship
SyntaxEnergy <ship name> <units of energy to transfer>
The receiving ship must be located in an adjacent sector. 10% of the energy transferred will be lost due to broadcast dissipation. If you attempt to send more energy than the other ship can store (ie 5000 units), the transfer will automatically be reduced to the maximum possible.
Examples
E I 1000 | Transfer 1000 units of energy to the Intrepid. The Intrepid will receive 900 units of energy. |
Submit a GRIPE
Add a comment, bug report, suggestion, etc. to the top of file GAM:DECWAR.GRP. Type in your comments, then ^Z (CTL-Z) to exit and continue the game, or ^C (CTL-C) to abort and not send the gripe. Each gripe is preceded with a header that includes the version number, date, time, ship name, user name, TTY speed, PPN, TTY number, job number, and whether or not Romulans and/or black holes are included in the game. Unless you are currently under red alert, GRIPE will protect you from enemy attack. To view gripes not yet acted upon, type the file GAM:DECWAR.GRP. To view answered gripes, and see what action was taken on them, type the file GAM:DECWAR.FXD.
Give HELP
SyntaxHelp [*|<keywords>]
Give general help info, a list of available commands, or a detailed description of a particular command or keyword. Unless you are under red alert, HELP will protect you from enemy attack. The following conventions are used in the detailed descriptions: - The first line contains, in all caps, the keyword that help is being given for. - The syntax line (second line) lists the portion of the keyword required to make it unique in caps, and the remainder of the keyword in lower case, followed by any parameters (if the keyword is a command). - A quantity to be filled in is lower case and enclosed in <> (angle brackets). - Optional parameters are enclosed in [] (square brackets). - A choice (either or) is indicated by | (vertical bar). - Any parameter that must be typed in literally is started in capital letters and continued in lower case. The upper case letters signal the shortest unambiguous abbreviation (the shortest abbreviation may change slightly, depending on context).
Examples
H | Give general help info. |
H * | List all available commands. |
H H | List this block of text. |
H SH | Give help for the SHIELDS command. |
H HI G | Give some general HINTS and a description of the GRIPE command. |
Move using IMPULSE engines
SyntaxImpulse [Absolute|Relative] <vpos> <hpos>
Move one sector vertically, horizontally, or diagonally (equivalent to warp factor 1). Ship condition changes to green.
Examples
I 37 45 | Move to sector 37-45. |
I A 37 45 | Equivalent to "I 37 45". |
I R 1 -1 | Move to sector 37-45, if your ship's present location is 36-46. |
LIST ship, base, and planet info
The following information is available via the LIST command:
- Name of any ship currently in the game (including the Romulan).
- Location and shield percent of any friendly ship, or any ship within scan range (10 sectors).
- Location and shield percent of any friendly base, or any base within range.
- Location of any known enemy base (any base that has previously been SCANned or LISTed by anyone on your team).
- Location and number of builds of any known planet, or any planet within range.
The above information is also available, in whole or in part, through the SUMMARY, BASES, PLANETS, and TARGETS commands. Each command has it's own default range, side (Federation, Empire, Romulan, Neutral), and object (ship, base, planet). LIST (and SUMMARY) include everything (infinite range, all sides, all objects) by default. On output, enemy objects are flagged with * (star) in column 1 unless the command is TARGETS.
Keywords used with BASES, PLANETS, TARGETS, LIST, and SUMMARY (not all keywords are legal for all commands):
ship names | Include only specified ships (several ship names may be given, including Romulan). |
vpos hpos | List only the object at the location vpos-hpos. |
CLosest | List only the closest of the specified objects. |
SHips | Include only ships (Federation, Empire, or Romulan). |
BAses | Include only bases (Federation or Empire). |
PLanets | Include only planets (Federation, Empire, or Neutral). |
POrts | Include only bases and planets. If no side is specified (Federation, Empire, Neutral, or Captured), include only friendly ports. |
FEderation | Include only Federation forces. |
HUman | Same as Federation. |
EMpire | Include only Empire forces. |
Klingon | Same as Empire. |
FRiendly | Include only friendly forces (Federation or Empire). |
ENemy | Include only enemy forces (Empire or Federation and Romulan). |
TArgets | Same as enemy. |
NEutral | Include only neutral planets. |
CAptured | Include only captured planets (Federation or Empire). |
n | Include only objects within n sectors. |
ALl | Include all sides unless a side is explicitly given. Extend the range to infinity unless a range is explicitly given. |
LIst | List individual items. Turn off summary unless command is SUMMARY or the keyword SUMMARY is specified. |
SUmmary | List summary of all selected items. Turn off list unless command is LIST or the keyword LIST is specified. Extend the range to infinity unless a range is explicitly given. |
And | Used to separate groups of keywords. |
& | Same as AND. |
Examples
LIST | List all information available on all ships, bases, and planets. |
LIST SUM | List all available info plus a summary of the number of each object in game. |
LI EN BA | List the location of all known enemy bases. |
LI SH | List all available info on all ships in the game. |
LI CL PO | List closest friendly base or friendly or neutral planet. |
LI 1 3 & 9 5 | List the objects at locations 1-3 and 9-5. |
MOVE using warp drive
SyntaxMove [Absolute|Relative|Computed] <vpos> <hpos>
Maximum speed is warp factor 6, which will move you 6 sectors per turn. Maximum SAFE speed is warp factor 4; warp factors 5 and 6 risk potential warp engine damage. Energy consumption per move is proportional to the square of the warp factor. If the ship's shields are up during this movement, the energy consumption is doubled. Moving changes your ship's condition to green.
Examples
M 37 45 | Move to sector 37-45. |
M A 37 45 | Equivalent to "M 37 45". |
M R 4 -5 | Move to sector 37-45, if your present location is 33-50 (move up 4 sectors and left 5 sectors). |
M C W | "Ram" the Wolf. No actual collision occurs, but your ship ends up adjacent to the Wolf's current position. |
Display the NEWS file
Display GAM:DECWAR.NWS, which contains information on any new features, enhancements, bug fixes, etc for each version of DECWAR.
Fire PHASERS at an enemy ship, base, or planet
SyntaxPHasers [Absolute|Relative|Computed] [energy] <vpos> <hpos>
Phasers must be directed at a specific target, and only one target may be specified per command. Obstacles seemingly in the path of the phaser blast are unaffected, since the energy ray is not a line-of- sight weapon. The size of the hit is inversely proportional to the distance from the target. Maximum range is 10 sectors vertically, horizontally, or diagonally. Each phaser blast consumes 200 units of ship energy, unless a specific amount of energy is given (the specified energy must be between 50 and 500 units, inclusive). The phaser banks have roughly a 5% chance of damage with a default (200 unit) blast, with the probability of damage reaching nearly 65% with a maximum (500 unit) blast. The severity of the resulting damage is also dependant on the size of the blast. Also, if your ship's shields are up, a high-speed shield control is used to quickly lower and then restore the shields during the fire. This procedure consumes another 200 units of ship energy. The weapons officer on board your ship will cancel all phaser blasts directed against friendly ships, bases, or planets. Firing phasers (or getting hit by phasers) puts you on red alert. NOTE: Although phasers can damage enemy planetary installations (BUILDs), they can NOT destroy the planet itself.
Examples
PH 12 32 | Phaser target at sector 12-32. |
PH A 12 32 | Equivalent to "PH 12 32". |
PH R 2 -3 | Phaser target at sector 12-32, if your location is 10-35. |
PH C BUZZARD | Phaser the Buzzard (if in range). |
PH C B | Same as PH C BUZZARD (ship names can be abbreviated to 1 character). |
PH 300 12 32 | Phaser target at sector 12-32, using 300 units of energy. |
List various PLANET information
SyntaxPLanets [<keywords>]
List location and number of builds for all known planets, and a summary of planets within a specified range or the entire galaxy. The default range is 10 sectors, and the default side is every side. See the help for LIST for more information and the complete set of keywords that can be used to modify PLANETS output.
Examples
PL | List all planets within 10 sectors. |
PL SUM | Give summary of all planets in game. |
PL ALL NEU | List all known neutral planets. |
PL ALL CAP | List all known captured planets. |
PL ALL 20 | List all known planets within a radius of 20 sectors. |
List POINTS scored so far this game
SyntaxPOints [Me|I|Federation|Human|Empire|Klingon|Romulan|All]
Itemize the current point breakdown. Information can be obtained concerning the points scored by your individual ship, your team, the opposition, the romulans, or any combination of the above. If the Romulan Empire is not involved in the game, the ROMULAN keyword will be ignored.
Categories in POINTS breakdown:
- Damage to enemies.
- Enemies destroyed (500 points each).
- Damage to bases.
- Planets captured (100 points each).
- Bases built (1000 points each).
- Romulans damaged/destroyed.
- Stars destroyed (-50 points each).
- Planets destroyed (-100 points each).
- Total points scored.
- Total number of ships commissioned.
- Total score / number of players.
- Total score / stardates.
Examples
PO | List points for your ship. |
PO ME | Equivalent to "PO". |
PO KLI FED | List the score of the two teams. |
PO ALL | List all the scoring information available. |
QUIT the game
Quit the game before normal end of execution and return to the monitor. Your ship is released for use by another player, you're chalked up as just one more casualty, and you can't CONTINUE the game. If you want to rejoin the game, you'll have to wait 2 minutes, and then either START or RUN the game. If you want to exit the game temporarily (to answer SENDS, etc.), type ^C (CTL-C), and you'll usually be able to CONTINUE. NOTE: If you're under red alert, you won't be able to ^C out of the game; you'll have to use the QUIT command.
Turn sub-space RADIO on or off, or
set to ignore or restore communications from individual ships
SyntaxRAdio ON|OFf or RAdio Gag|Ungag <ship name>
Turn your ship's sub-space radio on or off, thus controlling whether or not you'll receive any messages from other ships or your bases; or suppress or restore messages originating from specific ships.
Examples
RA ON | Turn sub-space radio ON. |
RA OFF | Turn sub-space radio OFF. |
RA G L | Suppress all radio messages sent by the Lexington. |
RA U W | Allow radio messages sent by the Wolf to be received. |
REPAIR device damage
Repair damaged ship devices. If a ship suffers a critical hit to a device, REPAIR can be used to restore the device to full (or partial) working order. A REPAIR removes the specified units of damage from each damaged device, in addition to the normal repair rate of 30 units per turn. If the ship is DOCKED, the pause time for the specified REPAIR is reduced by half of that needed while in flight. If the repair size is not specified, REPAIR defaults to a 4 second repair (50 units + 50 more if docked). REPAIR does NOT reduce the SHIP damage.
Examples
RE 100 | Remove up to 100 units of device damage. |
RE | Same as "RE 100" if DOCKED, else same as "RE 50". |
Full range SCAN
SyntaxSCan [Up|Down|Right|Left|Corner] [<range>|<vr><hr>] [W]
Display a selected portion of the nearby universe. If no range is specified, SCAN defaults to a square scan range of ten sectors from the present ship location. The keywords UP, DOWN, RIGHT, LEFT, and CORNER modify this to include only the part of this original square specified (relative to the ship). The maximum scan range is 10 sectors, and larger specified ranges are reduced to this value. If individual vertical and horizontal ranges are specified, the scanning field will be shaped accordingly. The WARNING keyword if added to the end of a SCAN command string will flag the empty sectors within range of an enemy base or planet with !'s instead of .'s. The SCAN symbols and their meanings are:
Scan symbols
| Symbol | Meaning |
|---|
E,F,I,L,N,S,T,V,Y | Federation warships |
B,C,D,G,H,J,M,P,W | Empire warships |
~~ | Romulan warship |
[] | Federation starbase |
() | Empire starbase |
@ | Neutral planet |
+@ | Federation planet |
-@ | Empire planet |
* | Star |
(blank) | Black hole |
. | Empty sector |
! | Empty sector within range of enemy port (only when using WARNING keyword) |
Examples
SC | Scan universe within a radius 10 sectors. |
SC 10 | Equivalent to "SC". |
SC 13 | Equivalent to "SC 10" or "SC". |
SC 4 | Scan universe within 4 sectors. |
SC 4 4 | Equivalent to "SC 4". |
SC 2 8 | Scan up to 5 rows and 17 columns, centered on the present ship location. |
SC U 4 7 | Show only upper half of normal "SC 4 7" scan. |
SC C -5 -5 | Scan the region bounded by the present ship location and the location (-5,-5) sectors away (puts ship in upper right corner of the scan). |
SC W | Same as "SC", plus shows danger zones around enemy bases and planets. |
SET input and output parameters
SyntaxSEt <keyword> <value>
| Keyword | Value | Description |
|---|
Name | name | Change name (shows in USERS). |
Output | Long | Default. Use longest output format. |
| Medium | Use medium output format. |
| Short | Use short (cryptic) output format. |
Scan | Long | Default. Use long format scans. |
| Short | Use 1 character symbols instead of 2. |
Prompt | Normal | Default. Use "COMMAND: " prompt. |
| Informative | Use "> " for prompt. Precede the ">" with: S if shields are down or < 10%. E if ship energy < 1000 (yellow alert). D if ship damage > 2000. nL if life support is critically damaged (n stardates of reserves). |
Ttytype | | CRT, ADM-3a, ADM-2, SOROC, BEEHIVE, ACT-IV, ACT-V, VT05, VT06, VT50, VT52, VT100 Tells DECWAR the TTY type so that it can do rubout, R and U properly |
OCdef | Absolute | Default. Display all coordinates in absolute format (vpos-hpos). |
| Relative | Display coordinates relative to your location (dv,dh). |
| Both | Display coordinates in both absolute and relative form. |
Icdef | Absolute | Default. All input coordinates default to absolute. |
| Relative | Input coordinates default to relative. |
Examples
SE PR I | Switch to informative prompt. |
SE OU S | Set output format to short. |
SE N THOR | Change your name in USERS to THOR. |
SHIELD control
SyntaxSHields Up|Down or SHields Transfer <energy>
Raise or lower ship shields, or transfer energy between ship and shield energy reserves. Raising shields consumes 100 units of ship energy, lowering them or transfering energy is "free". NOTE: Shield condition is displayed as +n% for shields up, n% of full strength, or -n%, for shields down, n% of full strength.
Examples
SH U | Raise shields. |
SH D | Lower shields. |
SH T 500 | Transfer 500 units of energy TO shields |
SH T -500 | Transfer 500 units of energy FROM shields |
Short Range SCAN
SyntaxSRscan [Up|Down|Right|Left|Corner] [<range>|<vr><hr>] [W]
Equivalent to SCAN, but with a default scan range of 7 sectors. For complete information on sensor scans, see the help on SCAN.
Show ship STATUS
SyntaxSTatus [Condition|Location|Torpedoes|Energy|Damage|Shields|Radio]
Show the current stardate, plus the status of any of the ship attributes: ship condition, location, number of torps, ship energy, ship damage, shield energy, and radio condition. Ship condition can be green, yellow (low on energy), or red (in battle). Radio condition is either on or off.
Examples
ST | Give full status report. |
ST T | Report how many torpedos remain on board. |
ST E D SH | Report the ship energy, the ship damage, and the shield condition (energy, %, up/down). |
ST L | Report the current ship location. |
Give SUMMARY on number of ships, bases, and planets
SyntaxSUmmary [<keywords>]
Give any of the information available from the LIST command, but give only a summary by default. See the help on LIST for more information and the complete set of keywords that can be used to modify SUMMARY output.
Examples
SUM | Tell how many ships, bases, and planets are in the game (broken down into friendly, enemy, and neutral categories). |
SUM EN | Tell how many enemies are in the game (number of Romulans, enemy ships, enemy bases, and enemy planets). |
List information on TARGETS
SyntaxTArgets [<keywords>]
Primarily for locating targets during battle, when a SCAN would be too time consuming. List location and shield percent of any enemy ship, base, or planet in range; name of any enemy ship in game (including the Romulan); or location and number of builds of any known enemy planet. TARGETS is equivalent to a LIST command with a default range of 10 sectors and a default side of enemy.
Examples
TA | List all targets within 10 sectors. |
TA 10 | Equivalent to "TA". |
TA 5 | List all targets within 5 sectors. |
TELL another ship something using the sub-space radio
SyntaxTEll All|FEderation|HUman|EMpire|Klingon|ENemy|FRiendly|<ship names>;<msg>
Send messages to one or several of the players currently in the game, with no range limitation. Players who have turned their radios off, or have a critically damaged sub-space radio can not be sent to. The TELL command can not be repeated using the ESCAPE key (no junk mail!).
Examples
TE V;Hello! | Send "Hello!" to the Vulcan. |
TE KL;DROP DEAD Send "DROP DEAD" to all Klingons. | |
TE V,E;HELP ME | Send "HELP ME" to the Vulcan and Excalibur. |
List various TIMEs
List time since game started; time since your ship entered the game; run time for your job so far this game; total run time since login; and current time of day.
Fire photon TORPEDO burst
SyntaxTOrpedo [Absolute|Relative|Computed] n <v1><h1> [<v2><h2> [<v3><h3>]]
A photon torpedo is aimed along a path in physical space, thus any object lying along its path will intercept the torpedo. One, two, or three torpedoes may be fired with one command, and the torpedoes may be individually targeted, or fired at a common location. The minimum range of a torpedo is 8 sectors, but some will travel 10 sectors before self-destructing. Torpedoes may be deflected from the desired track by a number of different factors, including your ship's shield strength, computer and torpedo tube damage, and torpedo misfires. A torpedo misfire also aborts the remainder of the burst, and sometimes damages the torpedo tubes as well. Torpedoes can cause stars to go nova, and can also destroy planets (if no enemy installations remain intact). "Accidental" hits on friendly ships, bases, or planets are automatically neutralized. A torpedo burst uses no ship energy. Firing torpedoes (or getting hit by one) puts you on red alert.
Examples
TO 1 12 24 | Fire one torpedo at sector 12-24. |
TO 3 12 24 | Fire three torpedoes at sector 12-24. |
TO 3 6 7 8 7 9 12 Fire one torpedo at sector 6-7, one at 8-7, and one | at 9-12. |
TO 3 12 24 13 39 | Fire one torpedo at sector 12-24, and two at sector 13-39. |
TO A 3 12 24 | Equivalent to "TO 3 12 24". |
TO R 2 2 -5 | Fire two torpedoes at sector 22-25, assuming your location is 20-30. |
TO C 3 BUZZARD | Fire three torpedoes at the Buzzard. |
TO C 1 E | Fire one torpedo at the Excalibur. |
TRACTOR beam
SyntaxTRactor <ship name> or TRactor Off
Tow another ship of the same team. The two ships must be located in adjacent sectors and both ships must have their shields lowered. Once such a beam is applied, either ship can pull the other behind it using warp or impulse engines. Energy consumption for the towing ship is 3 times the normal rate for movement with the shields down. The ship being towed will end the move trailing the lead ship. If either ship raises deflector shields, the tractor beam is automatically cut. The tractor beam will also be broken if either ship is hit by a torpedo or damaged by a nova.
Examples
TR | Break any existing tractor beam. |
TR OFF | Equivalent to "TR". |
TR B | Apply tractor beam to the Buzzard. |
TYPE game, input, and output settings
Type the current game OPTION and OUTPUT settings. The OPTION settings are: - The version number and date of implementation, - Whether there are Romulans in the game, - and whether there are Black Holes in the game. The OUTPUT settings are: - SHORT, MEDIUM, or LONG output, - NORMAL or INFORMATIVE command prompt, - SHORT or LONG sensor scans, - ABSOLUTE or RELATIVE default for coordinate input, - ABSOLUTE, RELATIVE, or BOTH for coordinate output, - and the current TTYTYPE.
Examples
TY OP | List the option settings. |
TY OU | List the output settings. |
List USERS
List all ships currently in the game. Include ship name, captain (may be changed by SET NAME), TTY speed, PPN, TTY number, and job number. If the output format is set to medium or short, omit the TTY and job numbers. If the output format is set to short, omit the TTY speed and PPN (include only the ship name and captain).
No commands match that filter.
Reference
Input, output and hints
General INPUT information
- Only the first 5 characters of each input word are stored. Any characters beyond that are ignored.
- Input words may be separated by spaces, tabs, or commas.
- The input line can be terminated with <CR>, <LF>, <VT>, <FF>, <ESC>, or ^Z.
- ^G toggles echo. At the beginning of each input line, echoing is turned on. Typing ^G turns it off, the next ^G turns it back on, etc. Echoing is always turned back on at the end of an input line, or if ^U is typed.
- Multiple commands may be given on a single command line by separating the commands with / (slash). If the TELL command is given, it must be last on the line.
- Anything after ; (semicolon) is treated as a comment and is ignored (but TELL rescans the line and takes the text after the first ; as the message to send).
- <ESC> (escape, or altmode) entered as the first character in response to the command prompt (even before ^H, ^U, or ^R) repeats the previous command. This is useful when building a planet, docking, repairing, firing torpedoes, etc. Altmode can't be used to repeat a TELL command.
- Any ship name can be abbreviated to 1 character.
- Any command or keyword can be shortened to the shortest unambiguous abbreviation, which is never more than 2 characters.
- Many commands require a coordinate as an argument (PHASERS, TORPEDOES, CAPTURE, BUILD, etc.). The required coordinate(s) can be specified in one of three ways:
- Absolute: the default coordinate input type, which is simply an absolute vertical position followed by an absolute horizontal position. The coordinate may be preceded by the keyword ABSOLUTE, but this isn't necessary unless the default coordinate input type has been changed by SET ICDEF RELATIVE.
- Relative: the keyword RELATIVE, followed by a relative vertical distance and a relative horizontal distance. A positive distance is either up or right, and negative is either down or left. The absolute coordinate is computed by adding the relative distances to your current position. The keyword RELATIVE isn't needed if the default coordinate input type has been changed by SET ICDEF RELATIVE.
- Computed: the keyword COMPUTED followed by a ship name. The coordinate used is the location of the given ship. This type of coordinate computation is available only to captains controlling their ships through slow terminals (< 1200 baud), and requires an operational computer.
The keyword ABSOLUTE, RELATIVE, or COMPUTED is only given one time for each set of coordinates. For instance, the TORPEDO command can accept up to 3 coordinates, but the keyword describing the coordinate input type is given only once, and all coordinates must be of the same type.
Output formats
HELP OUTPUT
General OUTPUT information
The SET OUTPUT LONG/MEDIUM/SHORT command controls the length of text output throughout the game. In particular, Medium or Short hit messages received during battle are greatly reduced in length when compared to the Long format. Unfortunately, these shorter forms are not as self-explanatory as the Long form. The following are some equivalent Long, Medium and Short hit messages:
Note: The -@3 indicates an Empire planet built 3 times.
Note: The relative coordinates appear due to a SET OCDEF BOTH command. The Panther's shields are 72.1% of max strength, but down (-72.1%).
The DECWAR.INI file
HELP DECINI
Use of the DECWAR.INI file
After initialization (picking which side and ship), DECWAR looks for the file DECWAR.INI in the UFD of the logged in PPN. If it finds one, it displays the message
[Reading commands from DECWAR.INI]
and reads the lines from the file just as if they were being typed from the TTY (it echoes the commands as they are read). After all commands have been read and executed, DECWAR switches to TTY input and displays the message
[Reading commands from TTY]
Typical commands to be executed from DECWAR.INI include the various SET commands, and information getting commands such as TARGETS and SCAN. A typical DECWAR.INI file might contain:
set prompt informative ;change prompt to ">"
set ocdef both ;want absolute and relative coords
set output medium ;don't want info output for novices
targets ;just to see who's around
srscan 2 w ;take a quick peek
Note that the comment character ; (semicolon) and the echo control character ^G (CTL-G) can also be used in DECWAR.INI. If you don't want the comment to be echoed at run time, simply precede it with ^G to turn echoing off while the comment is scanned.
The Decwar PRE-GAME feature
DECWAR provides a Pre-game feature to allow:
- New players to view the help file without entering the current game.
- Experienced players to check the status of a current game before choosing a side and ship.
- Players to submit Gripes without entering the game.
The commands currently active within the Pre-game section are: Activate Gripe Help News Points Quit Summary Time Users
The ACTIVATE command (valid only in the pre-game) is used to exit the pre-game section and enter the normal ship setup stage. The pre-game can be recognized from the 'PG>' command prompt, as well as the DECWPG program name.
Some general HINTS
- When in doubt, use the on-line help system. See the help on HELP for more information.
- If the output starts piling up in the middle of a battle, type ^O (CTL-O). None of your commands will be executed until output is finished, so it's sometimes better just to ignore the hit messages so your attack or run commands can be executed immediately.
- Use multiple commands per line (separate commands with /). Once you're in a danger area, things can happen faster than you can react to them. Plan your action ahead of time, before you enter a danger area.
- If some unexpected action happens, such as an enemy finding you, and you have several stacked commands (either from a multiple command line or typing ahead), type ^C to abort all stacked commands (especially if it involves time consuming commands such as BUILD, or commands that generate a lot of output, such as SCAN). You can then proceed to remedy the situation by giving your unexpected visitor a good beating.
- If you're on a slow terminal, use computed coordinates, and move around a lot if you're fighting someone on a fast terminal. Computed coordinates are the primary advantage slow terminals have over the fast ones (computed coordinates give slow terminals a fantastic tactical advantage over fast terminals when used properly).
- Use <ESC> to repeat commands (see the help on ESCAPE). It's just a convenience when building planets, etc., but in battle, and combined with multiple commands per line and/or computed coordinates (such as PH C B/M R 1 0 or TO 1 32 45), it can make or break your career as a starship captain.
- Don't get within range of an enemy base, unless you enjoy being pounded into rubble. You can kill a base just as well from 1 sector outside it's range (use the WARNING keyword on SCAN to see the range of an enemy base).
- Don't waste your energy and torpedoes firing at friendly ships and bases. If you're not sure if it's friendly or not, type HELP SCAN for a list of what's what. You can also use the TARGETS command to see which enemies are lurking about (see the help on TARGETS and LIST).
- Don't make it a habit of sitting next to stars; photon torpedoes can turn them into novas, which are extremely destructive. Conversely, if you notice an enemy ship or base adjacent to a star, take advantage of the situation!
- One sure way to locate enemy ships is to watch for newly captured enemy planets by using the PLANETS or LIST command.
- In general, don't waste photon torpedoes battering at a target with 85-100% shields. The chances are good that they will just be deflected harmlessly away. Use your phasers to weaken the shields, then use torpedoes to finish him off. This is especially true when attempting to destroy an enemy starbase.
- Use the SET command in DECWAR.INI to personalize the output to your own tastes. That way you'll be guaranteed to have the output set right each time you play a game.
- To always see the range and direction of any object listed (in hit messages, output from the LIST command, etc.), SET OCDEF BOTH. (The range is the magnitude of either delta v or delta h, whichever is larger.)
Commands that take time
HELP PAUSES
Commands that take real time
Many of the commands are designed to take a certain amount of real time. This is done to help equalize the game when there are different speed terminals and different speed typists in the game. Some commands take a constant amount of time, and some are based on the speed of the slowest terminal in the game.
| Command | Pause |
|---|
BUILD | 5 to 7 seconds |
CAPTURE | 5 seconds + 1 second for each BUILD of enemy planet |
DOCK | 2 to 4 seconds |
IMPULSE | 2 to 4 seconds |
MOVE | 2 to 4 seconds |
REPAIR | (0.08 * repair size) seconds (* 0.5 if docked) |
You have 2 phaser banks, each of which must be cooled off after it's fired before it can be used again. Each phaser bank takes 3 to 6 seconds plus the amount of phaser damage / 100 to cool off. For instance, if there was a 300 baud terminal in the game, and your phasers had 200 units of damage, each of your phaser banks would take 6 + 2 = 8 seconds to cool off after being fired. Therefore, you could fire once every 4 seconds, or twice every 8 seconds.
After each burst of torpedoes the tubes must be reloaded before being used again. It takes 2 to 4 seconds plus the amount of torpedo tube damage / 100 to load a torpedo. For instance, if there was a 300 baud terminal in the game, your torpedoes had 200 units of damage, and you had just fired 3 torpedoes, it would take 3 * (4 + 2) = 18 seconds before you could fire torpedoes again.
Use of ^C
If you're in command input wait (DECWAR is waiting for you to type a command, and the program name is set to DECWTI), typing ^C will abort the game and return you to monitor mode. When you abort the game in this manner, your ship is returned to the pool of available ships. You will be able to continue unless a new player has taken your ship or someone has moved into the spot you occupied.
If you're not in a command input wait state when you type ^C, any stacked commands (commands that you typed in ahead of time that haven't been executed yet) will be aborted, and a series of bells will be output.
NOTE: A ship under RED alert conditions can not be returned to the monitor level except by using the QUIT command.
Use of ^T
The program name changes during different stages. During startup, it will be DECWAR. When waiting for input, it will be DECWTI. When executing a command, it will be DECWRN. When sleeping after a command that takes time (MOVE, CAPTURE, BUILD, etc.) it will be DECWSL. You can tell what state the game is in by typing ^T and looking at the program name displayed. This is useful when you're not sure if it's waiting for a command yet or still executing a series of commands you typed in ahead of time. If the player is not in the game itself but just in the Pre-game section, the program name is DECWPG.
Transcribed from DECWAR.HLP, DECWAR Version 2.3, November 20, 1981. Text is reproduced from the original file; only the layout has changed. View the original text file · Back to top ↑